Bench-top Conductivity Meter NBCM-200 measures conductivity from 0.000 μ S/cm to 3000 m S/cm for precise results. This meter supports up to 5-point calibration and automatically recognizes standard solutions for quick setup. It provides advanced temperature compensation, ensuring accurate measurement. It offers auto, timed, and continuous reading modes for smooth operation. Our unit has advanced data management features for easy use and data handling.
$1,900.00
| Conductivity Range | 0.000 μ S/cm to 3000 m S/cm |
| Conductivity Resolution | 0.001 μ S/cm (minimum) |
| Conductivity Accuracy | ±0.5% FS |
| Reference Temperature Range | 5, 10, 15, 18, 20, 25 °C |
| Calibration Points | Up to 5 |
| Standard Recognition | 10μS/cm,84μS/cm,500μS/cm,1413μS/cm,12.88mS/cm, 146.5μS/cm, 1408μS/cm, 12.85mS/cm, 111.3mS/cm |
| Resistivity Range | 5.00 Ω•cm to 100.0 MΩ•cm |
| Resistivity Accuracy | ±0.5% FS |
| Resistivity Resolution | 0.01 Ω•cm minimum |
| TDS Range | 0.000ppm to 1000ppt |
| TDS Resolution | 0.001mg/L minimum, changed with range |
| TDS Accuracy | ±0.5% FS |
| Salinity Range | 0.0 to 80.0 ppt |
| Salinity Resolution | 0.1ppt |
| Salinity Accuracy | ±1ppt |
| Temperature Range | -10 to 135°C |
| Temperature Resolution | 0.1 |
| Temperature Accuracy | ±0.1 |
| Reading Mode | Auto-read, continuous |
| Reading Prompts | Reading, stable, locked |
| Temperature Compensation | MTC, ATC |
| Data Storage | 1000 groups |
| Data Input | 5-pin aviation connector |
| Backlight Display | Yes |
| Auto shutdown | 300, 600, 1200, 1800, 3600 sec., of |
| IP Rating | IP65 |
| Power | 100 to 240V AC, DC5V |
| Dimension ( L×W×H ) | 90×255×40 mm |
| Weight | 500g |
Customizable parameters
Auto-hold function
Factory reset option
USB communication support
Intelligent operating system
Bench-top Conductivity Meter NBCM-200 is used for water quality testing and environmental monitoring. It is used in laboratories, agriculture, aquaculture, and wastewater treatment fields.
