Any Query ?
Automatic Carbon Residue Tester NACR-100
Automatic Carbon Residue Tester NACR-100 is designed for precise measurement of carbon residue in petroleum products. It features a 7-inch colored touch LCD interface, which simplifies operation and enhances user experience. With automated control of heating temperature and flow rate, it ensures consistent and accurate results. Real-time display of the device's working state allows users to monitor the progress of tests. With storage for up to 10,000 test results, it facilitates data management and analysis.
| Measuring range | 0.10 % (m/m) to 30 % (m/m) |
| Temperature range | Room temperature to 600 °C |
| Temperature control of the cooking oven | 500 °C ± 2 °C |
| Test positions | 12 |
| Flow rate | 150ml/min and 600 ml/min, automatic switching |
| Data storage | 10000 pcs |
| Reserved interface | Electronic balance, LIMS |
| working condition | 15 to 35 °C, RH ≤ 85% |
| Power supply | AC220V±10%, 50Hz ± 5% |
| Maximum power consumption | 2000 W |
| Dimension of cooking oven | Ø 85 mm × 105 mm |
It is widely used in petroleum, chemical and research industries. It is also suitable for determining carbon residue in lubricating oil, heavy liquid fuels, and other petroleum products
| Working Voltage | AC 220 V ± 10%, 50 Hz |
| Ambient Temperature | 5 to 35 ℃ |
| Ambient Humidity | ≤ 85% |
| Working Conditions | No vibration, no dust, no corrosive gas, no strong magnetic field interference, no strong light exposure |
| Quantity of Parallel Samples | 2 |
| UV-light Wavelength | 365 nm |
| Light Source | HB LED |
| Electric Agitator | Two channels are controlled separately |
| Maximum depth measurement | > 620 cone penetration |
| Timer setting range | 0 to 99seconds ± 0.1seconds |
| Operating Environment | Indoor use, no corrosive gases |
| Ambient temperature | ≤ 30°C |
