Tabletop Autoclave NTTA-108 is a compact laboratory steam sterilizer that uses high-pressure steam at 121–134°C to sterilize laboratory instruments, glassware, culture media, and biohazard waste. It is designed for small to moderate laboratory workloads.
NTTA-108 is a tabletop steam sterilizer used in laboratories and clinics to sterilize instruments, glassware, media, and waste using 121–134°C steam with gravity and pre-vacuum cycles for effective microbial elimination.
It is used for:
Sterilizing laboratory instruments
Disinfecting glassware and containers
Preparing culture media
Decontaminating biohazard waste
It ensures complete sterilization in clinical and research environments.
It works by using saturated steam under pressure.
Steam replaces air inside the chamber
Heat (121–134°C) kills microorganisms
Pre-vacuum removes air for deeper penetration
Gravity cycle supports standard loads
Result: complete sterilization of bacteria, viruses, and spores.
Use this autoclave when:
You have small to moderate lab workloads
You need compact equipment
You require validated sterilization cycles
You work with porous or complex lab materials
Yes, if you are in:
Clinical laboratories
Pharmaceutical labs
Biotechnology labs
Research institutions
Diagnostic centers
It is ideal for routine sterilization workflows.
Compact tabletop design
Gravity + pre-vacuum sterilization cycles
121–134°C operating range
Digital programmable control system
Safety: pressure valve + door interlock
Suitable for instruments, liquids, and waste
USP, ISO, FDA, GMP compliant
NTTA-108: Best for compact labs with moderate workload
NTTA-107: Similar performance, slightly lower capacity
Vertical autoclave: Best for bulk sterilization
Horizontal autoclave: Best for industrial-scale use
NTTA-108 balances space + performance + efficiency.
It uses 121–134°C steam, which effectively kills microorganisms and spores.
Typically 20–60 minutes, depending on load type and size.
It removes air before steam enters, allowing deeper penetration into porous materials.
Yes, liquids can be sterilized using controlled cycles to prevent overflow.
Yes, it includes pressure control valves, door interlocks, and automatic shutdown systems.
Avoid heat-sensitive plastics, volatile chemicals, and incompatible powders.
Laboratory sterilization workflows
Clinical instrument sterilization
Microbiology culture preparation
Waste decontamination
USP sterilization guidelines
ISO sterilization standards
FDA regulations
GMP compliance
Tabletop Autoclave NTTA-108 is a 23 L compact laboratory steam sterilizer designed for efficient sterilization of instruments, glassware, culture media, and biohazardous waste. It operates at 134°C and 0.22 MPa and features a microcomputer-controlled system, built-in steam generator, LCD display, touch controls, and multiple safety protections. Its stainless-steel chamber ensures reliable, safe, and consistent sterilization performance in laboratories and clinical settings.
