Digital Micro Vickers Hardness Tester NDMVT-300 supports a wide test force range from 10gf to 1000gf, ideal for microhardness analysis. Our built-in camera captures high-resolution indentations for software-based measurement. This motorized XY stage ensures precise multi-point or patterned testing. Our touchscreen interface allows control over dwell time, turret, and data export functions. It has measurement data that can be instantly converted, validated, and output to reports or databases.
$16,625.00
| Test Force Range | 10gf,25gf,50gf,100gf,200gf,300gf,500gf,1000gf |
| Hardness Test Range | 5 HV to 3000 HV |
| Test Modes | HV / HK |
| Loading Method | Automatic (Loading / Dwell / Unloading) |
| Turret | Automatic shifting |
| Conversion Scale | HK,HRA,HRB,HRC,HRD,HRE,HRF,HRG,HRK,HR15N,HR30N,HR45N,HR15T,HR30T,HR45T,HS,HB |
| Objective Lenses | 10X (Observe), 40X (Measure) |
| Eyepiece | Digital 10X with encoder |
| Total Magnification | 100X, 400X |
| Resolution | 0.0625 μm, measuring range 200nm |
| Dwell Time | 1 to 99 seconds (1-sec increments) |
| XY Table Travel Range | Automove: 110X110mm |
| Camera | Built-in 1.3 MP or 5 MP digital camera |
| Display | 7” Touchscreen |
| Light Source | Halogen bulb (high clarity) |
| Sample Max Height | 90 mm |
| Throat Depth | 110 mm |
| Power Supply | AC 220V, 50 Hz |
| Machine Size | 320 × 500 × 570 mm |
| Net Weight | 60 kg |
Fully automated operation
Fracture toughness test
Dual test modes
Auto report generation
Real-time data output
Low-force indentation
Digital Micro Vickers Hardness Tester NDMVT-300 used for evaluating microhardness and fracture toughness of metals, ceramics, and surface coatings with precise load control. It is widely used in welding inspection labs, metallography research, and materials quality control departments.
Professional Automatic Version HV Measuring Software × 1 pc
Software USB Dongle × 1 pc
Motorized Test Table Control Box × 1 pc
Motorized X-Y Testing Table × 1 pc
Digital Camera & Camera Adapter × 1 pc
Weights Shaft × 1 pc
Weights × 6 pcs
10X Digital Eyepiece × 1 pc
10X Objective Lens × 1 pc
40X Objective Lens × 1 pc
Vickers Diamond Indenter × 1 pc
Level Bubble × 1 pc
Flat Fixture × 1 pc
Sheet Specimen Fixture × 1 pc
Standard Block of Hardness × 2 pcs
Spare Fuse (2A) × 2 pcs
Horizontal Adjusting Screw × 4 pcs
Power Line × 1 pc
Dustproof Cover × 1 pc
Screwdriver × 2 pcs
Accessory Box × 1 pc
1: What is the test force range supported by the Digital Micro Vickers Hardness Tester NDMVT-300?
The Digital Micro Vickers Hardness Tester NDMVT-300 supports a wide range of micro-loads from 10gf to 1000gf (0.098N to 9.80N), allowing it to evaluate materials with varying hardness levels. This versatility makes it suitable for metals, ceramics, and even delicate surface coatings.
2: Does the Digital Micro Vickers Hardness Tester NDMVT-300 support automatic measurement and reporting?
Yes, Digital Micro Vickers Hardness Tester NDMVT-300 features a fully automated system with motorized XY stage and integrated software that handles indentation, autofocus, hardness calculation, and test report generation. Users can export results directly in Word, Excel, or PDF format with customizable templates.
3: Can the Digital Micro Vickers Hardness Tester NDMVT-300 measure both Vickers and Knoop hardness?
Absolutely. Digital Micro Vickers Hardness Tester NDMVT-300 supports both HV (Vickers) and HK (Knoop) hardness test modes. Knoop mode is especially useful for testing thin materials or coatings where minimal penetration is critical, and switching between modes is seamless via software.
4: How accurate and repeatable are the measurements of the Digital Micro Vickers Hardness Tester NDMVT-300?
The Digital Micro Vickers Hardness Tester NDMVT-300 ensures high precision with a resolution of 0.0625 micrometers and repeatability better than micrometer. It uses advanced image processing algorithms and automatic point detection to minimize user error and provide consistent, reliable hardness values across repeated tests.
5: What kind of samples can be tested with the Digital Micro Vickers Hardness Tester NDMVT-300?
The Digital Micro Vickers Hardness Tester NDMVT-300 is designed to handle small, polished specimens such as metal alloys, heat-treated layers, glass, ceramics, and coated surfaces. With a maximum specimen height of 90 mm and a throat depth of 110 mm, it accommodates a wide range of lab and industrial samples.
6: What is a Digital Micro Vickers Hardness Tester used for?
It is used to measure the hardness of micro-scale components, coatings, and thin materials. These testers provide accurate readings ideal for metallurgical, electronic, and research applications.
7: What test forces are available in Digital Micro Vickers Hardness Testers?
They typically support test forces ranging from 10 gf to 1000 gf, allowing users to perform detailed hardness testing across various sample types and thicknesses.
8: Does it include automatic loading and unloading?
Yes, modern models feature fully automatic loading, dwell, and unloading mechanisms, improving efficiency, consistency, and reducing operator fatigue.
9: Can the Digital Micro Vickers Hardness Tester convert between hardness scales?
Yes, these testers usually provide multi-scale conversion, including HV, HK, and several Rockwell and Brinell scales, simplifying data comparison and reporting.
10: Where are Digital Micro Vickers Hardness Testers commonly used?
They are widely used in research laboratories, production quality control, educational institutions, and industries such as automotive, aerospace, electronics, and materials science.
Labnics Digital Micro Vickers Hardness Testers offer accurate hardness measurements for small and delicate components. They are equipped with automatic loading to ensure repeatable test results. Our fine resolution readings enhance precision for microstructure analysis. These provide fine resolution readings to capture even minor indentation differences. They have multiple conversion scales that allow easy translation of results.
