COD Analyzer NCA-100
| High COD Range |
20 to 10000mg/L |
| Low COD Range |
2 to 150mg/L |
| Accuracy for COD < 50mg/L |
≤ ±5% |
| Accuracy for COD > 50mg/L |
≤ ±3% |
Benchtop COD Digester NBCD-101
| Digestion capacity |
16 vials |
| Vial volume |
Maximum 10ml |
| Vial dimension |
ф16 × 150 mm / ф20mm × 150 mm |
| Digestion temperature |
45°C - 190°C |
Portable Conductivity Meter NCM-100
| Conductivity specifications:-
Conductivity range |
0.000µS/cm ~ 1000mS/cm |
| Conductivity resolution |
0.001µS/cm |
| Conductivity accuracy |
± 1.0% (FS) |
| Resistivity specifications:-
Resistivity range |
5.00Ωcm~ 100.0MΩcm |
Dissolved Oxygen Sensor NOS-100
| Dissolved Oxygen Range |
0~20 mg/L or 0~200 % |
| Dissolved Oxygen Sensor |
Optical DO sensor |
| Dissolved Oxygen Accuracy |
0.01 |
| Dissolved Oxygen Sensor Drift |
<1 % per year |
Dissolved Oxygen Sensor NOS-101
| Dissolved Oxygen Range |
0 to 20mg/L or 0 to 200% |
| Sensor |
Optical DO sensor |
| DO Accuracy |
0.03 |
| Dissolved Oxygen Sensor |
Drift <1% per year |
Portable Fluoride Analyzer NPFA-100
| Ion Concentration |
| Range |
0.02 to 1900 ppm |
| Resolution |
0.001, 0.01, 0.1, 1, automatic |
| Accuracy |
±0.5% F.S |
| Calibration Points |
2 to 5 points |
| Calibration Solutions |
0.001 / 0.01 / 0.1 / 1 / 10 / 100 /1000/10000 |
| Measurements Units |
ppm, mg/L, mol/L, mmol/L |
|
| mV |
| Range |
(-1999.9 to 1999.9) mV |
| Resolution |
0.1 mV |
| Accuracy |
±0.2 mV |
|
| Temperature |
| Range |
0 to 105°C / 32 to 221°F |
| Resolution |
0.1°C/°F |
| Accuracy |
±0.5°C / ±0.9°F |
| Offset Calibration |
1 point |
| Calibration Range |
Reading ±10°C/°F |
|
| Other |
| Temperature Compensation |
0 to 100°C / 32 to 212°F, manual or automatic |
| Hold Function |
Manual / Auto-read measurement endpoint |
| Stability Criteria |
Low / High |
| Calibration Due Alarm |
1 to 31 days or off |
| Auto-Power Off |
10 / 20 / 30 minutes after last key pressed |
| Memory |
Stores up to 500 data sets |
| Output |
USB communication interface |
| Connector |
BNC, 3.5 mm jack socket |
| Display |
Custom LCD (80 × 60 mm) |
| Power Supply |
3 × 1.5V AA batteries or 5V DC power adapter |
| Battery Life |
Approximately 150 hours without backlight |
| Environmental Conditions |
0 to 50°C / 32 to 122°F, relative humidity < 80% |
| Dimensions |
170 × 85 × 30 mm |
| Weight |
300g |
|
Labnics Benchtop Multi-Parameter Meter offers both automatic and manual temperature compensation, ensuring precise measurements. They include data analysis functions for detailed examination and interpretation of results. Our units include a touchscreen for simple and intuitive operation. These meters feature automatic electrode diagnosis to continuously monitor electrode conditions. They offer a data storage function for saving and managing measurement records.
Benchtop Multi-Parameter Meter NBMM-101
| Test parameters |
pH, conductivity, temperature, salinity, TDS, and dissolved oxygen |
| pH
Range |
-2.000 to 20.000 pH |
| pH Accuracy |
±0.002pH |
| pH Resolution |
0.1, 0.01, 0.001pH, Selectable |
Benchtop Multi-Parameter Meter NBMM-102
| Test Parameters |
pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal. /DO Saturation) |
| pH |
Range: -2.000 to 20.000 pH<br/>
Resolution: 0.1, 0.01, 0.001 pH<br/>
Accuracy: ±0.002 pH<br/>
Calibration Points: Up to 6<br/>
Standard Customization: Yes<br/>
Calibration Reminder: Yes<br/>
Slope Limit: Yes |
| Calibration Solutions |
NIST, GB, DIN, USA, MERK, JIS buffers |
| mV/ORP |
Range: -2000.00 to 2000.00 mV<br/>
Resolution: 0.1, 0.01 mV<br/>
Accuracy: reading whichever is greater<br/>
Calibration Points: 1 custom point (relative mV) <br/>
EH ORP Mode: Yes |
Labnics Multiparameter Conductivity Meter are designed to measure multiple parameters for comprehensive analysis. They feature imported sensors and advanced optical system for precise measurement. They offer various conductivity ranges for accurate sample readings. They are constructed with durable materials to withstand harsh environments. Our meter is ideal for water quality analysis, environmental monitoring and industrial processes.
Portable Multiparameter Conductivity Meter NPMCM-100
| pH |
| Range |
-2.000~20.000pH |
| Accuracy |
±0.002pH |
| Resolution |
0.1, 0.01, 0.001pH, Selectable |
| Calibration Points |
1 to 5 points |
| Calibration Solutions |
USA, NIST, DIN or User-defined |
| Temperature Compensation |
0~100°C, 32~212°F |
| Compensation Mode |
Manual or Automatic |
|
| mV |
| Range |
-1999.9~1999.9mV |
| Accuracy |
±0.2mV |
| Resolution |
0.1, 1mV, Selectable |
|
| Conductivity |
| Range |
0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm |
| Accuracy |
±0.5% F.S |
| Calibration Points |
1 to 5 points |
| Calibration Solutions |
10µS/cm, 84µS/cm,1413µS/cm,12.88mS/cm,111.8mS/cm |
| Temperature Compensation |
0~100°C, 32~212°F, Manual or Automatic |
| Temperature Coefficient |
0.0~10.0%/°C |
| Compensation Modes |
Linear or Pure Water |
| Cell Constant |
K=0.1, 1, 10 or User-defined |
| Normalization Temperature |
20°C or 25°C |
|
| TDS |
| Range |
0to100ppt (Max. 200ppt, depending on factor setting) |
| Accuracy |
±1% F.S |
| TDS Factor |
0.1~1.0 (Default 0.5) |
|
PH Conductivity Meter NPCM-101
| pH Measuring Range |
- 2.00 to 19.99 pH |
| pH Resolution |
0.1/0.01 pH |
| pH Accuracy |
Meter: ±0.01 pH; Overall: ±0.02 pH |
| Input Current |
≤ 2×10⁻¹² A |
Portable PH Conductivity Meter NPCM-102
| Measuring Parameters |
Conductivity, temperature |
| Measuring Conductivity Range |
0.01 to 20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm |
| Measuring Conductivity Resolution |
0.001, 0.01, 0.1, 1 |
| Measuring Conductivity Accuracy |
±0.5% F.S. |
PH Controller Analyzer NPCA-100
| Model no |
NPCA-100 |
| Detection method |
Electrode method |
| Measuring range |
0 ~ 14 pH; normal temperature (0 ~ 80 ℃) |
| Resolution |
0.01ph |
Benchtop PH Meter NBPM-201
| pH measuring range |
0.00 ~ 14.00 pH |
| pH resolution |
0.01 pH |
| pH accuracy |
± 0.01 pH |
| Temperature measuring range |
0°C~100°C |
Benchtop PH Meter NBPM-200
| pH Specifications:-
Range |
(-2.000~20.000) pH |
| Accuracy |
±0.002pH |
| Resolution |
0.1, 0.01, 0.001pH, Selectable |
| Calibration Points |
1 to 5 points |
Benchtop PH Meter NBPM-202
| Measuring Parameters |
pH/mV |
| pH Measurement Range |
-2.00 to 18.00 pH |
| pH Measurement Resolution |
0.01 pH |
| pH Measurement Accuracy |
± 0.01 pH |
PH ORP Meter NPOM-100
| Model name |
NPOM-100 |
| Measuring Range |
-2.00~20.00pH |
| Display Resolution |
0.01pH |
| Measurement Accuracy |
± 0.01pH |
Turbidity Meter NTM-100
| Measurement range |
0~1100 NTU, 0~275 EBC, 0~9999 ASBC |
| Measurement accuracy |
±2% of reading (0~500 NTU), ±3% (501~1100 NTU) |
| Measurement resolution |
0.01 (0~100 NTU), 0.1 (100~999 NTU), 1 (999~1100 NTU) |
| Sample volume |
30 ml |
Turbidity Meter NTM-101
| Turbidity Range |
0.000 to 20.00 NTU, 20.01 to 200.0 NTU, 200 to 2000 NTU, 2001 to 4000 NTU |
| Accuracy |
≤ ±6% |
| Resolution |
0.01NTU, 0.1NTU, 1NTU |
| Repeatability |
≤ 0.5% |
Bench-top Conductivity Meter NBCM-100
| Parameters |
Conductivity, Temperature, Resistivity, TDS, and Salinity |
| Conductivity mode |
<table cellspacing=0 border=1>
<tr>
<td style=min-width:50px>Range </td>
<td style=min-width:50px>0.000 µS/cm to 3000 mS/cm</td>
</tr>
<tr>
<td style=min-width:50px>Resolution </td>
<td style=min-width:50px>0.001 µS/cm minimum, changes with ranges</td>
</tr>
<tr>
<td style=min-width:50px>Accuracy </td>
<td style=min-width:50px>± 0.5% FS</td>
</tr>
<tr>
<td style=min-width:50px>Reference Temperature </td>
<td style=min-width:50px>5, 10, 15, 18, 20, 25 ºC</td>
</tr>
<tr>
<td style=min-width:50px>Calibration Points </td>
<td style=min-width:50px>Up to 5</td>
</tr>
<tr>
<td style=min-width:50px>Standard Recognition </td>
<td style=min-width:50px>146.5 µS/cm, 1408 µS/cm, 12.85 mS/cm, 111.3 mS/cm</td>
</tr>
</table> |
| Resistivity Mode |
<table cellspacing=0 border=1>
<tr>
<td style=min-width:50px>Range </td>
<td style=min-width:50px>5.00 Ω ·cm to 100.00 M Ω ·cm</td>
</tr>
<tr>
<td style=min-width:50px>Resolution </td>
<td style=min-width:50px>0.01 Ω ·cm minimum</td>
</tr>
<tr>
<td style=min-width:50px>Accuracy </td>
<td style=min-width:50px> ± 0.5% FS</td>
</tr>
</table> |
| TDS Mode |
<table cellspacing=0 border=1>
<tr>
<td style=min-width:50px>Range </td>
<td style=min-width:50px>0.000 mg/L to 1000 g/L</td>
</tr>
<tr>
<td style=min-width:50px>Resolution </td>
<td style=min-width:50px>0.001 ppm minimum, changes with range</td>
</tr>
<tr>
<td style=min-width:50px>Accuracy </td>
<td style=min-width:50px>±0.5% FS</td>
</tr>
</table> |
Online Ion Meter NOIM-100
| Measurement Range |
0 to 35500mg/L(ppm) |
| Measurement Principle |
Ion electrode method |
| Resolution |
0.01mg/L(ppm) |
| Basic Error |
± 2.5% |
Labnics Online Ozone Meter detects ozone levels accurately across a wide range of concentrations. They include manual and automatic temperature compensation modes for reliable results. These ozone meter comes with built-in alarm functions for immediate alerts on fluctuating values. They enable efficient and reliable data transfer, ensuring smooth integration with other systems. Our units feature a large screen display for clear and easy interpretation of results.
Online Ozone Meter NOOM-100
| Measurement Range |
0 to 20mg/L<br/>
0 to 20 ppm |
| Measurement Principle |
Potentiometric method |
| Resolution |
0.001mg/L;0.001ppm |
| Basic Error |
±1%F. S |
Labnics Digital pH Meter includes 3-point calibration to ensure reliable and consistent pH measurements. They include a digital pH sensor for obtaining precise results. The replaceable pH electrode allows to change of the degraded electrode for easy maintenance. Their stable operation enhances to function without fluctuations, assuring accurate data. Our Digital pH Meter eliminates vibrations, for precise readings by minimizing errors.
Digital PH Meter NDPM-100
| pH Range |
0.00 to 14.00 pH |
| pH Accuracy |
± 0.01 pH |
| pH Resolution |
0.01 pH |
| Calibration Points |
Three points (4.00, 6.86, 9.18) |
Labnics Water Activity Meter measures moisture levels accurately across a wide range of materials. They offer calibration capabilities that allow for easy adjustments to maintain accurate measurements. Our units feature an LCD for clear reading of measurement results. They provide efficient data transfer options for reliable connectivity, ensuring easy integration with other devices. These water activity meters have a print function for easy documentation of results.
Water Activity Meter NWAM-100
| Measuring Water Activity Range |
0 to 1.000 aw |
| Measuring Water Activity Accuracy |
±0.012 aw (at 23℃ ± 5℃) |
| Operating Temperature Range |
-10℃ to 50℃ |
| Relative Humidity |
0 to 95%RH |
Labnics Chlorine Analyzers are designed to provide accurate readings in many applications. They feature automatic temperature compensation, ensuring precise measurements across varying temperatures. Their portability allows for easy integration into various settings, offering flexibility. They include calibration capabilities for enhanced accuracy and reliable performance. Our units are built with durable materials for long-lasting reliability.
Portable Chlorine Analyzer NCLA-100
| Measuring principle |
Constant voltage method |
| Measuring range |
0 to 2.000mg/L; 0 to 20mg/l (HClO) |
| Resolution |
0.001mg/L; 0.01mg/ |
| Accuracy |
±5%; ±0.05mg/L，±0.3℃ |
