Labnics Automatic Glassware Washer NAGW-105 cleans glassware in a 760 L lumen volume chamber, with dual circulating pumps each running at 800 L/min to drive water through the spray arms and nozzles. Cleaning temperature ranges from room temperature up to 93℃ at 18 kW water heating power, while drying runs from room temperature up to 120℃ at 6 kW drying power. As a high capacity lab glassware washer, it operates through PLC Siemens control with a 10 inch touchscreen, and is available in single door or double door configurations with electric door opening.
| Lumen volume | 760 L |
| Display screen | 10-inch touch screen |
| Control system | PLC/siemens |
| Door structure | Single door and double door are optional |
| Opening mode | Open the electric door |
| Circulating pump flow rate (A) | 800 L/min |
| Circulating pump flow rate (B) | 800 L/min |
| Cleaning temperature | Room temperature 93°C |
| Water heating power | 18 kW |
| Drying temperature | Room temperature 120°C |
| Drying heating power | 6 kW |
| Voltage | 380 V/Hz |
| External dimensions (L ×W× H) | 1800 × 1000 × 2250 |
High-Efficiency Cleaning — Effective glassware washing
Optimized Spray Arms — Uniform cleaning with self-cleaning function
Rapid Drying System — HEPA-filtered hot air drying
Glass Viewing Window — Clear wash process visibility
Preset Wash Programs — Six programmable cleaning cycles
Safety Door Lock — Prevents accidental opening
Dual Temperature Control — Separate wash and dry settings
Emergency Stop Switch — Enhanced operational safety
Stainless-Steel Body — Corrosion-resistant design
Microbiological Labs | Pathology Labs | Pharmaceutical Labs |
Handles high-volume bulk disinfection with dual pump circulation | Thoroughly cleans and rapidly dries large batches of glassware | Delivers consistent sterile wash cycles for contamination-free results |
Labnics Glassware Washer runs wash cycles across chamber capacities ranging from 120 L to 420 L, with a maximum lumen volume of 760 L. The circulating pump drives wash water through the chamber at a configured flow rate, covering all loaded glassware through the wash and rinse sequence within a single cycle. Water consumption per cycle ranges from 15 L to 25 L, and inlet water pressure is configured per chamber size to match load volume.
