Labnics Automatic Glassware Washer NAGW-102 cleans laboratory glassware using a 320 L stainless steel wash chamber, with water consumption of 18 L per cycle. It operates at an inlet water pressure of 0.3 to 0.8 MPa, maintaining noise levels at or below 55 dB throughout the wash cycle. As a compact laboratory glassware washer, it accommodates three cleaning racks within a chamber sized at 600 × 629 × 820 mm, supporting consistent loading across runs. Drying is handled through a standalone air heater and HEPA filtration system, completing each cycle without manual intervention.
$22,838.00
| Capacity | 320 L |
| Water Consumption/Cycle | 18 L |
| Inlet Water Pressure | 0.3 to 0.8 Mpa |
| Noise | ≤55 dB |
| External &Internal Material | Stainless steel |
| Overall Power Consumption | 6.5/18 KW |
| Power Consumption-Water Washing | 1.5/2.8 KW |
| Power Consumption-Water Heating | 5/15 KW |
| Power Consumption-Drying | 3.6 KW |
| Cleaning Racks | 3 pcs |
| Power Supply | AC220V, 50/60Hz 380V, 50/60Hz |
| Washer Chamber Size (W × D × H) | 600 × 629 × 820 mm |
| External Size (W × D × H) | 690 × 790 × 1950 mm |
| Packing Size (W × D × H) | 990 × 840 × 2250 mm |
| Gross Weight | 400 Kg |
High-Efficiency Cleaning — Thorough glassware washing
Self-Cleaning Spray System — Uniform water coverage
Rapid Drying System — HEPA-filtered hot air drying
Stainless-Steel Body — Corrosion-resistant design
Reinforced Glass Window — Clear wash process visibility
PLC Touchscreen Control — Six preset wash programs
Electronic Door Lock — Prevents accidental opening
Dual Temperature Control — Separate water and drying settings
Emergency Switch — Immediate system shutdown
Microbiological Labs | Pathology Labs | Pharmaceutical Labs |
Handles bulk cleaning and disinfection of lab glassware across three rack loads | Thoroughly cleans and rapidly dries high-volume glassware | Delivers consistent sterile wash cycles for contamination-free results |
Labnics Glassware Washer runs wash cycles across chamber capacities ranging from 120 L to 420 L, with a maximum lumen volume of 760 L. The circulating pump drives wash water through the chamber at a configured flow rate, covering all loaded glassware through the wash and rinse sequence within a single cycle. Water consumption per cycle ranges from 15 L to 25 L, and inlet water pressure is configured per chamber size to match load volume.
