Portable PH Conductivity Meter NPCM-102 measures both conductivity and temperature for accurate monitoring. It features automatic calibration that recognizes conductivity standards for reliable measurements. Our meter includes an auto-read function that automatically senses and locks the measurement endpoint. It is equipped with an LCD display for clear and easy reading. This unit offers automatic electrode diagnosis, displaying calibration points and factors for precise results.
| Measuring Parameters | Conductivity, temperature |
| Measuring Conductivity Range | 0.01 to 20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm |
| Measuring Conductivity Resolution | 0.001, 0.01, 0.1, 1 |
| Measuring Conductivity Accuracy | ±0.5% F.S. |
| Measuring temperature Range | 0 to 105°C/32 to 221°F |
| Measuring temperature Resolution | 0.1°C/0.1°F |
| Measuring temperature Accuracy | ±0.5°C/±0.9°F |
| Calibration Points | 1 to 3 points |
| Calibration Solutions | 10µS/cm, 84µS/cm, 1413µS/cm, 12.88mS/cm, 111.8mS/cm |
| Offset Calibration | 1 point, reading ±10°C |
| Temperature Compensation | 0 to 100°C, manual or automatic |
| Temperature Coefficient | Linear (0.0 to 10.0%/°C), non-linear, pure water |
| Reference Temperature | 20/25°C |
| Cell Constant | K=0.1, 1, 10 |
| Hold Function | Manual or auto-endpoint |
| Auto-Off | 30 minutes after last key pressed |
| Memory | 100 data sets |
| Communication Interface | USB |
| Connector | 6-pin mini-DIN, 3.5mm jack socket |
| Display | Custom LCD (80 × 60mm) |
| Battery Life | Approximately 150 hours (Turn off the) |
| Power | 3 1.5V AA batteries or DC5V power adapter |
| Dimensions (L × W × H) | 170 × 85 × 30 mm |
| Weight | 300g |
Portable PH Conductivity Meter NPCM-102 is used to measure the pH and conductivity levels of liquids for accurate analysis. It is commonly used in laboratories, water treatment plants, and environmental monitoring.
