Horizontal Autoclave NHA-101 is a steam sterilization system that uses pressurized steam at 121–134°C and 15–30 psi to eliminate microorganisms, spores, and pathogens from laboratory instruments, media, and waste. It provides accurate, repeatable sterilization for medium-to-large loads.
Sterilization Method: Pressurized steam
Temperature: 121–134°C
Pressure: 15–30 psi
Cycle Time: 15–60 minutes
Load Type: Medium to large (horizontal trays)
Best For: Labs, hospitals, pharma production
Compliance: USP, ISO, FDA, GMP
Horizontal Autoclave NHA-101 is used to sterilize laboratory instruments, culture media, and biohazardous waste to maintain contamination-free environments.
Laboratory glassware and instruments sterilization
Culture media preparation
Biohazard waste decontamination
Hospital sterilization workflows
Pharmaceutical equipment sterilization
It works by:
Generating high-pressure steam
Removing air (gravity or vacuum method)
Heating to sterilization temperature (121–134°C)
Maintaining pressure for a fixed cycle
Destroying microorganisms and spores
Result: Uniform, complete sterilization
Pressure: 15–30 psi
Time: 15–60 minutes depending on load
Stainless steel chamber for durability
Programmable sterilization cycles
Uniform steam penetration
Safety systems: interlocks, alarms
Horizontal tray loading for efficiency
Pharmaceutical manufacturing
Biotechnology laboratories
Clinical & hospital labs
Research institutions
Food & beverage industry
Choose this model if:
You need medium-to-large batch sterilization
You handle biohazardous waste
You require regulatory compliance (USP, ISO, FDA)
You need repeatable sterilization cycles
Not ideal if:
You need small benchtop sterilization
Space is highly constrained
Horizontal Autoclave: Better for large loads and tray-based handling
Vertical Autoclave: Suitable for smaller labs and limited space
Horizontal models are preferred for higher throughput and efficiency
Conclusion: Pre-vacuum models offer the highest efficiency, but horizontal autoclaves provide the best balance of capacity and usability.
Vertical Autoclaves – Small labs
Dry Heat Sterilizers – Moisture-sensitive materials
Gas Sterilizers (EO/H₂O₂) – Heat-sensitive tools
UV Sterilizers – Surface sterilization
It sterilizes instruments, media, and waste using pressurized steam to maintain sterile laboratory conditions.
Typically 15–60 minutes, depending on load type and size.
Standard sterilization occurs at 121–134°C.
Using biological indicators, chemical indicators, and monitoring systems.
Yes, it is widely used for safe decontamination before disposal.
GMP (Good Manufacturing Practice)
ISO 17665 (Steam sterilization)
USP sterilization guidelines
FDA regulatory standards
Parent: Laboratory Sterilization Equipment
Related: NHA-100, Pre-Vacuum Autoclaves
Guides: Autoclave Buying Guide
Articles: Steam Sterilization Explained
Horizontal Autoclave NHA-101 is a 200 L front-loading steam sterilizer designed for laboratories, hospitals, and pharmaceutical facilities. It operates at 134°C and 0.22 MPa to sterilize instruments, glassware, media, and biohazard waste. Built with a durable 304 stainless steel chamber, it includes automatic pressure and temperature control, vacuum drying, low-water protection, and automatic shutdown for safe, efficient, and accurate sterilization.
