Laboratory Equipment
Product Data Sheet · Laboratory Equipment
Density Meter NDSM-100 is a plug-in type densitometer with a high-performance micro-controller integrated circuit providing high accuracy, good stability and strong anti-jamming function. The fluid density is directly proportional to the vibrational frequency obtained by the tuning fork when the sensor is put into the medium. Temperature compensation is provided by the built-in temperature sensor.
| Density Range | 500 to 2500 Kg/ m3 |
|---|---|
| Calibration Range | 800 to 1200 Kg/ m3 |
| Accuracy | ± 1 Kg/ m3 / ± 2 Kg/ m3 |
| Repeatability | ± 0.2 Kg/ m3 |
| Sensitivity Level | 0.0001 cm3/g |
| Temperature Range | (-20 to + 150) ℃ |
| Maximum Working Pressure | 10 Mpa |
| Fluid Viscosity Range | 0 to 20000 cP |
| Temperature Coefficient | Less than 1 Kg/ m3 / ℃ |
| Pressure Effect | Negligible |
| Built In Temperature Sensor | PT100 |
| Wetting Material | 316 L stainless stain Hastelloy |
| Fork Coating | Standard, PTFE or electropolished |
| Analog Signal Outage | 4 to 20 mA, 0 to 1000Hz, RS232 |
| Output Accuracy | ± 0.1 % of reading or ± 0.05 %FS |
| Output Repeatability | ± 0.05 %FS |
| Protection Level | IP65 |
| Shell Material | Aluminium alloy |
| Weight | 5 Kg |
Explore dependable laboratory equipment and expert support for research, testing and quality-control environments.
