Laboratory Equipment
Product Data Sheet · Laboratory Equipment
Labnics Dry Bath Incubator NDBI-401 features dual independent aluminium heating blocks that enable simultaneous multi-sample thermal processing with an RT+5°C to 150°C operating range, ±0.5°C thermal stability, and uniform heat distribution, ensuring consistent incubation performance in a dry bath incubator. Dual-block configuration with precision-machined aluminium alloy inserts supports higher-throughput sample handling while maintaining identical temperature control parameters across all positions. Rapid heat-up capability reaches 100°C in under 10 minutes, supported by PID microprocessor-based temperature regulation that delivers ±0.3°C control accuracy across RT+5°C to 100°C. Programmable timer ranges from 1 minute to 99 hours 59 minutes, integrated with automatic over-temperature protection and a fail-safe shut-down mechanism for secure, continuous, and reproducible laboratory workflow operation.
| Number of Blocks | 2 |
|---|---|
| Ambient Temperature Range | 5 to 40°C |
| Relative Humidity | ≤ 80% |
| Heat Output | 250 W |
| Heating Temperature Range | RT +5°C to 150°C |
| Temperature Display | LED |
| Resolution (Adjustment/Display) | 0.1 K |
| Temperature Stability at 37°C | ±0.5°C |
| Temperature Stability at 60°C | ±0.5°C |
| Temperature Uniformity at 37°C | ±0.5°C |
| Set-up Plate Material | Aluminium alloy |
| Fixed Safety Circuit | 180°C |
| Time Setting Range | 1 min to 99 h 59 min |
| Plate Dimensions | 96 × 152 mm |
| Dimensions (W × H × D) | 152 × 86 × 300 mm |
| Weight | 2.5 kg |
Explore dependable laboratory equipment and expert support for research, testing and quality-control environments.
