Clean Sampling Vehicle NCSV-200 Catalog

FEATURES

• ⇋ Mains and inverter battery are interchangeable, flexible, safe and reliable
• ⇋ LCD control panel with touch switch and is more intuitive understanding of the work of clean bench
• ⇋ 5 to 10 minutes prior equipment should be used to avoid UV disinfection
• ⇋ Headlamp in installed to ensure that the work environment is bright
• ⇋ Using superfine glass fiber paper as filtering material, offset paper, aluminum film and other materials as fengeban, glued with wood frame aluminum alloy
• ⇋ Working area is stainless steel frame, and the inside surface is of colorless transparent glass, novel structure easy to observe
• ⇋ DC power supply is used for rechargeable up to 8 to 12 hours of continuous work
• ⇋ Airflow volume adjustable system, reliable operation and low energy

SPECIFICATIONS

Dimension of working area (W1×D1×H1)	730×650×950 mm
Overall dimension (W×D×H)	900×730×1950 mm
Max. power	400 W
Weight	150 kg
Normal working condition	Temperature 5 °C to 40 °C
Relative humidity	≤ 80 %
Atmospheric pressure	86 to 106 kPa
Truckle	Flexible and reliable
Appearance	Sample vehicle box body is made from stainless steel or steel plate. The decorative curtain is smooth, vertical and not damaged
Illumination	Average illumination cannot be less than 86 to 106 kPa
Purifying efficiency	Ten thousand level or hundred thousand level
Average wind speed	0.4 ± 20 % (adjustable)
Noise	Not more than 63 dB (A)
Vibration	X, Y, Z vibration range is not more than 3 µm
Power supply	AC 220 V / 50 Hz
Material	Steel plate varnish / stainless steel

APPLICATIONS

Clean Sampling Vehicle is widely used in the field of pharmaceutical, biotechnology, electronics, etc. for the non-contaminated item transfer that can effectively avoid contamination to these items during the transfer.

METHOD OF USE

Move the clean sampling vehicle to the place where sampling is needed to be done
Fix it and connect it to the power supply. Turn on the power supply as well as the fan
Set the voltage to right range (usually 220 V), put sampling barrel in it after clean sampling vehicle works for 15 min
Take sampling barrel away after sampling. Turn off the fan and shut off the power supply
Move sampling vehicle to original place