Pulse Vacuum Autoclave NPVA-106 is a laboratory steam sterilizer that uses multiple vacuum cycles and high-pressure steam to remove air and achieve complete sterilization of instruments, glassware, liquids, and biohazardous waste, including wrapped and porous materials. It supports USP, ISO, and GMP-compliant sterilization standards.
Pulse Vacuum Autoclave NPVA-106 is a high-capacity laboratory sterilizer that removes air using vacuum pulses and uses saturated steam to sterilize complex, wrapped, and porous laboratory loads with validated microbial kill efficiency.
It is used to sterilize:
Surgical and laboratory instruments
Glassware and culture media
Biohazardous waste materials
Wrapped and porous laboratory loads
Sensitive and complex laboratory equipment
It works by removing air from the chamber using multiple vacuum pulses, then introducing high-pressure steam that penetrates all surfaces for complete sterilization.
Problem: Air trapped inside wrapped or porous loads prevents sterilization
System: Vacuum pulses remove trapped air completely
Result: Uniform steam penetration and validated sterilization
Multi-vacuum pulse sterilization system
Digital touchscreen control interface
Pre-programmed & customizable sterilization cycles
Compatible with wrapped, porous, and complex loads
Automatic monitoring and safety controls
Post-sterilization vacuum drying system
Pharmaceutical manufacturing
Biotechnology laboratories
Clinical and hospital sterilization units
Research and academic laboratories
Biohazard waste management facilities
Chamber Volume: 100–220 L
Temperature Range: 105–137°C
Pressure Range: 0.2–2.0 bar
Cycle Types: Pre-vacuum, Gravity
Display: Digital touchscreen
Power Supply: 220 V AC, 50/60 Hz
Weight: ~200 kg
Dimensions: 850 × 900 × 1450 mm
Choose NPVA-106 if you need:
Sterilization of wrapped or porous loads
High-volume laboratory processing
Regulatory compliance (USP, ISO, GMP)
Accurate and repeatable sterilization cycles
Avoid using NPVA-106 if:
You only need small tabletop sterilization
You handle very low-volume single instruments
You require portable field sterilization
USP: Ensures pharmaceutical-grade sterility standards
ISO: Defines universal quality and safety compliance
GMP: Ensures controlled and validated manufacturing hygiene
Yes. Vacuum pulses remove trapped air, allowing steam to fully penetrate wrapped and porous materials for complete sterilization.
Yes. A post-vacuum drying phase removes moisture and prepares instruments for immediate use.
Sterilization is verified using:
Biological indicators
Chemical indicators
Automated cycle monitoring systems
Door interlock safety system
Pressure & temperature sensors
Automatic shutdown protection
Alarm-based fault detection
Chamber cleaning
Vacuum pump inspection
Seal and filter replacement
Periodic calibration
Q1. What is a pulse vacuum autoclave used for?
It is used for sterilizing laboratory instruments, liquids, and biohazardous waste using vacuum-assisted steam penetration.
Q2. How is it different from gravity autoclave?
It removes air using vacuum pulses, while gravity autoclaves rely on air displacement.
Q3. Can it sterilize liquids?
Yes, using controlled liquid cycles to prevent boiling over.
Q4. What makes it suitable for pharma labs?
It provides validated sterilization cycles compliant with USP, ISO, and GMP standards.
Q5. What type of loads can it handle?
It handles wrapped, porous, liquid, and complex laboratory loads.
Sterilization of surgical instruments
Laboratory glassware processing
Biohazard waste treatment
Culture media preparation
Research laboratory sterilization workflows
Pulse Vacuum Autoclave NPVA-106 is a high-performance laboratory sterilizer designed for complex, wrapped, and porous loads. It uses multi-vacuum steam technology to ensure complete sterilization and supports USP, ISO, and GMP compliance for pharmaceutical, clinical, and research applications.
