Laboratory Equipment
Product Data Sheet · Laboratory Equipment
Gas Chromatography NGC-100 is a high-performance system with an advanced microcomputer-based temperature control system. Designed with a column oven, a data acquisition system, real-time instrument monitoring system, detection signal acquisition, PC control, 2 independent analogue signal outputs, and M6 software. The oven supports quick heat-up and rapid cool-down with an automatic back door opening and can hold up to 3 chromatographic columns. Features two sample injectors, each with independent temperature control, can be installed in the unit
| GC Inlet Temperature | 450°C |
|---|---|
| GC Pressure Range | 0 to 100 psi, ± 0.002psi |
| GC Pressure Control Mode | Electronic Pressure Control (EPC), Support CV and CC |
| GC Split Mode | Split/Splitless, Max. Split Ratio, 1000:1 |
| GC Column Oven Working Temperature | Room Temperature 4°C to 450 °C |
| GC Heating Rate | Up to 120 °C/min |
| GC Temperature Programing | 7 Stages/8 Platforms |
| GC Auto Sampler | Optional |
| MS EI Source Ionization Energy | 5 W to 250 W, V (Adjustable) |
| MS Mass Range | 1.5 to 1000 amu |
| MS Resolution | Unit Resolution(Full width at half maximum) |
| MS Ion Source Temperature | 100 to 3500 °C |
| MS Filament Emission Current | 0 to 350 pA |
| GC-MS Interface Temperature | Maximum 450 °C |
| MS Stability | ± 0.10 amu/48 hrs |
| MS Sensitivity | Full scan, 1 pg OFN at m/z 272 with S/N ≥30:1 (RMS) |
| MS Scan rate | Up to l000 amu/s |
| MS Vacuum | Turbo molecular pump(67L/s) |
| MS Detector | High energy dynode electron multiplier |
Explore dependable laboratory equipment and expert support for research, testing and quality-control environments.
