UV/ Vis Detector: Performs simultaneous dual wavelength analysis, wavelength scanning & remote control function.
- Wavelength range : 190 – 900 nm
- Specttra; bandwidth : 5 nm
- Wavelength Accuracy : 1 nm
- Wavelength precision
- Path length (mm) : 10
- Cell Volume (ul) : 13
- Tubing (ID) : 0.01"
- Cell Pressure (psi) : > 1.500
- Flow path material : SUS316, Teflon, Zirconium
- Monochromator Type; Czerny – Turner Mount ( blazed holographic
   grating }\ Base line noise
- Baseline drift : < ±2 x 10-5 AU at 254 nm
- Linearity : > 99.5% at 1.0 AU (acetone, 254 nm)
- Simultaneous dual wavelength detection with two lamps lamps
   (Deuterium lamp, 2,000 hrs life. 0.5 mm Arc and tungsten lamp
   used)
- Attenuation : 0.5 x 2000
- Time Constant : 0.1 to 9.9 sec
- Flow cell type : Cone type, 10 μℓ cell volume
- Display : 2 Lines x 20 Characters
- Dimension : 297 (W) x 198 (H) x 495 (D) mm

Catalog No. 47630227

It can simultaneously measure at upto four freely programmable detection channels with high sensitivity and continuously record spectra in a selectable scan range. With the level and event outputs, it is even possible to set up software independent solvent recycling by just adding a 3 port solenoid valve

RI effect compensation function of the Dual Wavelength Detector by minimizing noise and drift give optimized analysis results as stable base line. The RI Detectors are the detectors for system provides high sensitivity, stability and reproducibility of the analysis result with sensing difference of physical properties between polymers in detail.

The most important use of radioisotopes in bio-medical research is to label compounds so that quantities too small for chemical analysis can be traced through biological processes. The B Ram and r Ram Detectorcan use to detect very small quantities by labeling compounds.